Electric Glass Lifter & Glazing Robot – 300kg
A compact electric glass lifter designed to transport, position and install large glazing panels weighing up to 300 kg. Powered tracks allow the machine to travel across level surfaces, uneven ground and stairs while the powered lifting and positioning system helps place the glass accurately at the installation point.
- Electric lifting and powered glass positioning
- Motorised adjustable tilting arm
- Tracked movement across stairs and uneven surfaces
- Precise proportional joystick control
- Manual or electric suction cup configurations available
One machine from unloading to final positioning
Large glazing panels can be difficult to move through construction sites, across uneven ground and into restricted installation areas. This powered glass manipulator combines tracked transport, lifting and positioning functions in one compact machine.
Tracked Drive
Electric tracks allow controlled travel across level floors, outdoor surfaces, steps and stairways.
Powered Lifting
Electric lifting assists with raising and lowering the glass during transport and installation.
Adjustable Positioning
The powered tilting arm allows the panel angle to be adjusted to suit transport and installation conditions.
Tight-Space Control
Independent powered movement and proportional joystick control help manoeuvre the machine in restricted areas.
From transport to installation
The glass panel is secured to the machine using the suction cup attachment system. The powered lifting mechanism and adjustable arm allow the operator to raise, lower and position the panel without manually carrying its full weight.
Two electric motors and proportional joystick control provide precise movement, helping the machine manoeuvre around restricted construction areas and position the glazing close to its final installation point.
The tracked chassis can also travel over suitable stairs, inclines and outdoor surfaces, helping reduce the number of separate handling stages between unloading and installation.
The manufacturer also identifies the system for handling large glass panels, armoured glazing and similar flat panels where controlled lifting and positioning are required.
Designed for demanding glazing projects
Suitable for specialist glazing contractors, façade installers and construction teams handling large panels where access, weight and precise positioning need to be considered together.
Window Installation
Lift and position glazing accurately at the opening while reducing repeated manual handling.
Stair Access
Powered tracked movement assists with transporting glazing between floor levels where suitable access exists.
Construction Sites
Move glazing from delivery areas across site and position panels close to their installation point.
Difficult Access
Compact tracked movement helps where conventional glass-handling equipment cannot easily reach.
Built around controlled glass movement
The machine combines several functions normally required at different stages of glazing transport and installation.
Suction Cup System
Available with manual or electric suction cup systems for holding glazing securely during transport and positioning.
Motorised Tilting Arm
The electrically controlled arm allows the glass angle to be adjusted for transport, access and final installation.
All-Surface Tracked Drive
Powered tracks provide controlled movement on suitable indoor floors, outdoor ground, inclines and stairways.
Glass transport and positioning in one system
See how the electric glass manipulator transports, lifts and positions large glazing panels on site.
Electric Glass Lifter & Glazing Robot – 300kg
Final specification should take account of panel weight, panel dimensions, staircase or access conditions and the positioning requirements at the installation point.
| Available load capacities | 200 kg / 300 kg |
|---|---|
| Maximum load capacity | 300 kg |
| Maximum glass panel dimensions |
Width: 3 m Height: 2.5 m |
| Machine weight | Approx. 178 kg excluding battery |
| Battery | Li-ion 55 Ah – 24 V |
| Battery weight | Approx. 9 kg |
| Indicative battery range | Approximately 2,000 steps |
| Indicative charging time | Approximately 6 hours |
| Track speed – 200 kg version | Up to 0.25 m/s |
| Track speed – 300 kg version | Up to 0.15 m/s |
| Protection rating | IP54 |
| Control | Proportional joystick |
| Suction options | Manual or electric suction cup systems |
Battery runtime and charging figures are indicative and can vary according to load, battery condition, operating temperature and working conditions. Panel dimensions and access conditions should be assessed before selecting equipment. Specifications may be subject to manufacturer updates.
Need to move or install large glazing panels?
Tell us the glass weight and dimensions, the access route and where the panel needs to be positioned. We can help identify the most suitable glass handling configuration for the job.
Request a Quote