No Pit Required
The surface-mounted design reduces the structural work normally associated with a pit-installed lift.
Compact vertical goods transport
250kg Hand-Loaded Mezzanine Goods Lift
A compact, surface-mounted goods lift for moving boxes, crates and other hand-loaded items between a ground floor and mezzanine level. Its raised loading platform and small footprint make it a practical solution where usable floor space is limited.
250kg
Maximum working load
1000 × 800mm
Standard usable platform
Up to 6m
Standard travel height
2 stops
Ground plus one upper level
Floor mounted with no pit required
Self-supporting mesh-clad lift shaft
Interlocked landing gates and emergency stop
Designed for hand loading at approximately 950mm above floor level
Product overview
What Is a Hand-Loaded Mezzanine Goods Lift?
This light-duty mezzanine lift provides a controlled way to transfer smaller goods between floors without carrying them on stairs. It is intended for goods transport, with boxes and crates placed onto the platform by hand at each landing.
Easy Hand Loading
The platform docks at a practical loading height, making it suitable for boxes, crates and other manageable items.
Compact Footprint
A free-standing, self-supporting structure helps maximise usable space in warehouses and storage areas.
Controlled Operation
Constant-pressure controls are positioned at both levels for simple, deliberate platform movement.
Protected Landings
Electrical and mechanical gate interlocks help prevent access while the platform is away from a landing.
Configurable Layout
Same-side or through-loading arrangements are available, with bespoke options for more demanding sites.
Standard equipment
Key Features
- Maximum working load of 250kg
- Standard usable platform size of 1000 × 800mm
- Two stops: ground floor plus one upper level
- Self-supporting, mesh-clad shaft
- Anti-slip platform surface
- Constant-pressure controls at both levels
- Electrical and mechanical landing-gate interlocks
- Emergency stop button
Made for the site
Available Options
- Bespoke platform dimensions
- Increased travel height, subject to site assessment
- Additional stop for a three-level arrangement
- Same-side, through-car or 90-degree loading
- Additional entrances where required
- Outdoor installation specification
- Choice of finish colour
- Fully clad enclosure
Technical information
Standard Specifications
The final configuration is selected after reviewing the building, travel distance, loading direction and the goods to be moved.
| Maximum working load | 250kg |
|---|---|
| Standard platform size | 1000 × 800mm usable area |
| Standard travel height | Up to 6m |
| Stops | 2 stops as standard: ground plus one upper level |
| Loading height | Platform docks approximately 950mm above finished floor level |
| Loading arrangement | Same-side or through loading as standard; other arrangements available |
| Installation | Surface mounted; no pit required |
| Controls | Constant-pressure control buttons at both levels |
| Safety provisions | Interlocked landing gates, emergency stop and anti-slip platform |
| Intended use | Goods only; not intended for carrying passengers |
Specifications are indicative and may vary according to the selected configuration, travel height and site requirements.
Typical uses
Where Can This Goods Lift Be Used?
It is particularly suited to premises that need to move relatively small loads between a working floor and a mezzanine storage area.
Warehouses
Stockrooms
Retail Storage
Parts Departments
Small Distribution Areas
Workshops
Archives
Mezzanine Floors
Planning a Goods Lift Installation in Ireland?
Send us the load weight, item dimensions, required travel height, number of stops and preferred loading direction. Our team can help identify a suitable standard or bespoke configuration.