Load the Machine
Position the stable palletised load against the machine’s supporting sidewall.
Premier Pallet Inverters
G95 Pallet Inverter
A floor-level pallet-transfer system for stable, block-stacked loads weighing up to 1,500 kg.
The G95 provides a straightforward alternative to a conventional 180° pallet inverter. It gently clamps the load and tips it just beyond 90°, allowing the existing pallet to be released, removed and exchanged.
- Maximum loading capacity of 1,500 kg
- Flush-to-floor loading without an access ramp
- Suitable for pallet truck or forklift loading
- Single moving top-clamp system
- Ideal for stable, block-stacked boxed products
Load suitability is important:
the G95 works best with stable boxed products that
are block stacked close to the perimeter of the
pallet and can safely rest on their side.
1,500 kg
Maximum load capacity
Up to 105°
Controlled tipping angle
2.25 m
Maximum standard jaw opening
Floor Level
Flush pallet-truck loading
What Is a G95 Pallet Inverter?
The G95 is a pallet-retriever style transfer system. Instead of rotating a load through a complete 180°, it tips the load onto its side just beyond 90°.
When the upper clamp opens, the load moves gently away from the existing pallet using the machine’s sliding side plate. This creates sufficient space for the pallet to be removed and replaced.
Designed for floor-level loading
The loading table sits flush with the surrounding floor, allowing the machine to be loaded directly using a pallet truck without requiring a loading ramp. Forklift loading is also possible.
How Does the G95 Pallet Inverter Work?
The pallet exchange is completed through a controlled four-stage process.
Clamp the Load
The moving upper clamp lowers and gently secures the complete palletised load.
Tip and Release
The load tips just beyond 90° and the sliding side plate creates space for pallet removal.
Exchange the Pallet
Fit the replacement pallet, reclamp the load and return it to the upright position.
G95 Pallet Inverter Applications
The G95 is particularly effective in cold stores and facilities handling stable, boxed or block-stacked goods.
Frozen Food Handling
Suitable for stable palletised loads of frozen meat, fish, vegetables and other boxed frozen products.
Freezer Spacer Recovery
Remove and recover reusable freezer separators from blast-frozen palletised products.
Damaged Pallet Replacement
Replace broken, damaged or unsuitable pallets without manually unloading the complete stack.
Internal Pallet Transfer
Transfer incoming goods onto higher-quality internal or hygienic pallets used within the facility.
Rental Pool Pallets
Transfer loads to or from rental-pool pallets while retaining the required pallets on site.
Export Pallet Exchange
Move stable loads onto suitable export or one-trip pallets before dispatch.
Is the G95 Suitable for Every Palletised Load?
No. The G95 is intended for stable, block-stacked loads with minimal voids. The goods should extend close to the pallet perimeter and remain stable while resting on their side. Irregular, unstable or loosely stacked products may require an FS, FSDC or another pallet-transfer system.
G95 Features and Available Options
Two standard machine sizes are available, with custom dimensions and controls offered for specific applications.
Standard Features
- Heavy-duty floor-mounted construction
- Single moving upper clamp
- Flush-to-floor loading table
- Maximum loading capacity of 1,500 kg
- Sliding support plate for pallet release
- Dual hydraulic lever controls
- Standard machine guarding
- Zinc primer and two-pack epoxy acrylic top coat
Available Options
- Customised minimum and maximum jaw openings
- Smaller or larger custom-built machines
- Pendant-mounted push-button controls
- Console-mounted push-button controls
- Alternative guarding configurations
- Controls tailored to the operating process
- Special finishes for demanding environments
- Application-specific machine modifications
G95 Pallet Inverter Technical Specifications
The G95 is available in two principal standard sizes: G95/1950 and G95/2250.
| Specification | G95/1950 | G95/2250 |
|---|---|---|
| Loading capacity | 1,500 kg | 1,500 kg |
| Usable jaw opening |
Minimum 1.11 m Maximum 1.95 m |
Minimum 1.26 m Maximum 2.25 m |
| Standard load table | 1.23 m wide × 1.23 m deep | 1.23 m wide × 1.23 m deep |
| Power supply | Three-phase, 400 V, 15 A | Three-phase, 400 V, 32 A |
| Motor size | 2.2 kW | 4 kW |
| Approximate machine weight | 1,500 kg | 1,600 kg |
| Standard guard weight | Approximately 300 kg | Approximately 300 kg |
| Operating space including guards |
Width 3.84 m Depth 1.89 m Height 2.60 m |
Width 4.20 m Depth 1.89 m Height 2.82 m |
| Shipping dimensions without guards |
Width 2.30 m Depth 2.00 m Height 2.07 m |
Width 2.60 m Depth 2.00 m Height 2.07 m |
| Standard controls | Dual hydraulic lever controls. Push-button pendant or console controls are available. | |
| Installation | The machine must be securely fixed to a suitable floor. | |
Specifications are indicative and may vary according to the machine configuration, load dimensions, guarding and control options selected.
See the G95 Pallet Inverter in Operation
Watch the G95 tip a stable palletised load and release the existing pallet for exchange.
Is the G95 Right for Your Palletised Load?
Share your pallet dimensions, load height, product type and operating requirements with our team. We can help identify whether the G95 or another pallet-transfer system is best suited to your application.